Oculus Rift
Oculus Rift comes with two Oculus Touch controllers.
Figure 70: Oculus Touch controllers
Navigation (Panorama, 3D View)
Use the joystick (1) on the left-handed controller to move around while in 3D view.
On the right-handed controller press the “A” button (3) two times while pointing at an arbitrary scan in the panorama or 3D view to teleport to that location.
Measuring (Panorama, 3D View)
Use the analog button (2) to create measurements in the panorama or 3D view. Follow these steps:
1. Use your head and VR controllers to navigate a virtual pointer to the part of the project where you want to create measurements.
2. Press the measurement button (2) to start the measuring task from that point.
3. Move the virtual pointer to another location.
4. Press the measurement button (2) to select the end point and to finish the measuring task.
A measurement line and a text with the calculated distance between the two selected points are shown.
Note: The analog button will choose a point only when fully pressed, but if you want to increase precision while measuring, press the button only slightly and the virtual pointer will move more slowly. You can see the factor of precision as a “progress line” on the virtual pointer.
Create Annotations (Panorama, 3D View)
Point at an arbitrary location in panorama or 3D View and long-press the “A” button (3) for about 1 second; an annotation with the title VR Annotation will be created. After you exit VR mode SCENE WebShare Cloud will show an edit task for VR annotations you created. That tasks lets you edit the title, description, and other annotation properties.
Note: You must be logged in to your account to create annotations.
Switch between view modes (Panorama, 3D View)
On the right-handed controller press the “B” button (4) to switch between view modes.