Edit Tags
You can edit the name of a tag, create new tags or delete one or several tags.
Select Edit Tags from the Task Panel. The task description is displayed.
The yellow color states that at least one mandatory step is not finished. As soon as you enter valid data, the color will change to green.
Select Objects: Select one or more objects in the Overview Map.
Now, you have several possibilities:
Click the Select Object button, then click one or more objects.
Select one or more objects by using the Rectangular Selection button. Click the button, then mark the area in which the objects are.
Use the Deselect button if you do not want to edit the selected objects. Click the button, then mark the range again.
If one of the objects insides a marked area shall not be edited, click the Select Object button, then click the object.
A message is shown if one of the objects is write-protected.
Select Operation: Select to
add tags or to
remove selected tags, or
remove all tags.
The menu will now expand depending on your selection.
Set Tags:
Select, if this object should be assigned to a tag or enter a new tag name in the New Tag field and click Set.
Click OK in the task description to save the changes.
Remove selected tags: Click OK to remove all the selected tags.
Remove all tags: Click OK to remove all tags belonging to the selected objects.