User Documentation > Scan View > Edit Category
Edit Category
You can edit the name of a category belonging to one or more objects which have been selected before.
Select Edit Category from the Task Panel. The task description is displayed.
The yellow color states that at least one mandatory step is not finished. As soon as you enter valid data, the color will change to green.
1. Select Objects: Select one or more objects in the Panorama View.

Note: If you select an object that is write-protected, a warning appears. If you have Project Manager rights, you can click to edit the object.

Now, you have several possibilities:
Click the Select Object button, then click one or more objects.
Select one or more objects by using the Rectangular Selection button. Click the button, then mark the area in which the objects are.
Use the Deselect button if you do not want to edit the selected objects. Click the button, then mark the range again.
If one of the objects insides a marked area shall not be edited, click the Select Object button, then click the object.
A message is shown if one of the objects is write-protected.
2. Select Operation: Select to
Set a category or
Remove a category. Remove Categories will remove all the categories belonging to the selected objects.
The menu will now expand depending on your selection.
3. Set Category:
Choose an existing category to assign, or enter a new category name in the New Tag field and click Set.
Click OK in the task description to save the changes.