User Documentation > Scan View > Coordinate Picker
Coordinate Picker
You can use the Coordinate Picker in the Scan View as you can in the Overview Map. Note, though, that some scan views have areas that have no coordinates. These are areas such as the sky, or other areas that did not reflect the laser light during the scan. If you try to pick an area without coordinates, the thumbtack icon will turn red.
Figure 62: Coordinate picker in the Scan View
The thumbtack icon can be removed by clicking the reset button at the bottom of the browser.
Note: When a task is active, e.g., the Measurement task, you cannot pick points this way.